PVC MIXING SYSTEMS
TRM HEATING MIXERS
Plas Mec TRM HEATING MIXERS are used for
RIGID AND SOFT PVC MIXING
Mixing rigid or plasticized PVC
dry-blend obtained from polymers in suspension, emulsions or mass
They are the ideal solution in the transformation industry when good quality thermoplastic material must be combined with high hourly throughput.
The vessel lid can be supplied in different configurations; the internal surfaces are in stainless steel; the closure plug, is operated by a pneumatic cylinder and is adapted to fit the internal shape of the vessel.
Accessories and optional are available.
TRM SIZES & DATA
TRM 200
Total capacity L.: 200 – Mix (1) weight kg.: 85
Motor power kW(2): 45
TRM 300
Total capacity L.: 300 – Mix (1) weight kg.: 125
Motor power kW(2): 75
TRM 400
Total capacity L.: 400 – Mix (1) weight kg.: 170
Motor power kW(2): 90
TRM 500
Total capacity L.: 500 – Mix (1) weight kg.: 212
Motor power kW(2): 110
TRM 600
Total capacity L.: 600 – Mix (1) weight kg.: 255
Motor power kW(2): 132
TRM 700
Total capacity L.: 700 – Mix (1) weight kg.: 300
Motor power kW(2): 160
TRM 800
Total capacity L.: 800 – Mix (1) weight kg.: 340
Motor power kW(2): 200
TRM 1000
Total capacity L.: 1000 – Mix (1) weight kg.: 425
Motor power kW(2): 200
TRM 1200
Total capacity L.: 1200 – Mix (1) weight kg.: 500
Motor power kW(2): 250
TRM 1500
Total capacity L.: 1500 – Mix (1) weight kg.: 640
Motor power kW(2): 315
TRM 2000
Total capacity L.: 2000 – Mix (1) weight kg.: 850
Motor power kW(2): 400
TRM 2500
Total capacity L.: 2500 – Mix (1) weight kg.: 1065
Motor power kW(2): 450
Technical Sheet TRM
Download Technical Sheet TRM
N.B. The data shown in the table are purely indicative and must be confirmed by PLAS MEC
(¹) The mix weights are valid for PVC-suspension formula with an apparent density of 0,55kg/l inclusive of additives and for plasticized PVC –suspension with a percentage of plasticizers not greater than 40 p.h.r.
(2) Direct current motors, frequency variators. Or soft-start can be fitted to all models on request.
HIGH EFFICIENCY COOLING COMBINATION
HORIZONTAL COOLER COMBINATION – HC COMBIMIX by Plas Mec is the combination of the heating mixer TRM and the high performance horizontal cooler HEC.
The HEC range of coolers used for this combination, can be applied to any type of turbomixer and this is the ideal solution for all manufacturing needs in the field of rigid or plasticized PVC dry-blend.
This cooler is built entirely of stainless steel as regards the parts in contact with the material, double jacket for circulation of cooling water.
Improved cooling efficiency: rigid PVC (profile) 120 – 40°C, 8batchs/hour
Material can be stored at lower temperature and has no inertia.
Thanks to the total opening of the lid, cleaning and maintenance are quick and easy.
Available with capacities from 1000 up to 8.500 lt., the HEC cooler stands out for its great and proven cooling efficiency, allowing excellent throughput and high standards of quality.
Accessories and optional are available
HC COMBIMIX TRM + HEC SIZES & DATA
HC 300/1000
Hourly production kg/h
Rigid PVC Max (¹): 1000
Plasticized PVC max.: 762
HC 400/1000
Hourly production kg/h
Rigid PVC Max (¹): 1360
Plasticized PVC max.: 1020
HC 500/1500
Hourly production kg/h
Rigid PVC Max (¹): 1700
Plasticized PVC max.: 1260
HC 600/1500
Hourly production kg/h
Rigid PVC Max (¹): 2040
Plasticized PVC max.: 1530
HC 700/2500
Hourly production kg/h
Rigid PVC Max (¹): 2400
Plasticized PVC max.: 1800
HC 800/2500
Hourly production kg/h
Rigid PVC Max (¹): 2720
Plasticized PVC max.: 2040
HC 1000/3500
Hourly production kg/h
Rigid PVC Max (¹): 3400
Plasticized PVC max.: 2550
HC 1200/3500
Hourly production kg/h
Rigid PVC Max (¹): 4100
Plasticized PVC max.: 3000
HC 1500/4500
Hourly production kg/h
Rigid PVC Max (¹): 5100
Plasticized PVC max.: 3840
HC 2000/5500
Hourly production kg/h
Rigid PVC Max (¹): 6800
Plasticized PVC max.: 5100
HC 2500/6500
Hourly production kg/h
Rigid PVC Max (¹): 8400
Plasticized PVC max.: 6300
HC 2500/8500
Hourly production kg/h
Rigid PVC Max (¹): 8400
Plasticized PVC max.: 6300
Technical Sheet HC
Technical Sheet HEC
Technical Sheet TRM
news - The ideal machine to cool...
- The ideal machine to cool over 8 batches per hour from 120 ° C to 40 ° C is now a reality
The development and optimization of the coolers of mixing plant is the latest innovation launched by PLAS MEC and has been welcomed with great interest.
Thanks to PLAS MEC, today it is a straightforward task to cool over 8 batches per hour of U-PVC from 120°C to 40°C.
READ MORE>>
Download Technical Sheet HC
Download Technical Sheet TRM
Download Technical Sheet HEC
N.B. The data shown in the table are purely indicative and must be confirmed by PLAS MEC
(¹) Valid for fully-automatic operation with final temperature of 120°C for turbomixer and 45°C for cooler; but only when cooling water flow is sufficient and water temperature is no higher than 15°C.
COMBIMIX-RV
PVC mixer COMBIMIX-RV is the combination of the heating mixer TRM and the vertical cooler RFV.
The RFV range of coolers used for this combination is the ideal solution to combine the requirements of restricted spaces and easy cleaning with cooling efficiency.
This cooler is built entirely of stainless steel as regards the parts in contact with the material, double jacket for circulation of cooling water.
Supplementary ring to increase the heat exchange surface in the cooler mounted inside the vessel.
Accessories and optional are available.
RV COMBIMIX TRM + RFV SIZES & DATA
RV COMBIMIX - RV 200/400
Hourly production kg/h
Rigid PVC Max (¹): 595
Plasticized PVC max.: 510
RV COMBIMIX - RV 300/800
Hourly production kg/h
Rigid PVC Max (¹): 890
Plasticized PVC max.: 762
RV COMBIMIX - RV 400/1000
Hourly production kg/h
Rigid PVC Max (¹): 1200
Plasticized PVC max.: 1020
RV COMBIMIX - RV 500/1000
Hourly production kg/h
Rigid PVC Max (¹): 1470
Plasticized PVC max.: 1260
RV COMBIMIX - RV 600/1600
Hourly production kg/h
Rigid PVC Max (¹): 1785
Plasticized PVC max.: 1530
RV COMBIMIX - RV 700/1600
Hourly production kg/h
Rigid PVC Max (¹): 2100
Plasticized PVC max.: 1800
RV COMBIMIX - RV 800/2000
Hourly production kg/h
Rigid PVC Max (¹): 2380
Plasticized PVC max.: 2040
RV COMBIMIX - RV 1000/2500
Hourly production kg/h
Rigid PVC Max (¹): 2975
Plasticized PVC max.: 2550
RV COMBIMIX - RV 1200/2500
Hourly production kg/h
Rigid PVC Max (¹): 3500
Plasticized PVC max.: 3000
RV COMBIMIX - RV 1500/3600
Hourly production kg/h
Rigid PVC Max (¹): 4500
Plasticized PVC max.: 3800
Technical Sheet RV
Technical Sheet TRM
Technical Sheet RFV
Download Technical Sheet RV
Download Technical Sheet TRM
Download Technical Sheet RFV
N.B. The data shown in the table are purely indicative and must be confirmed by PLAS MEC.
(¹) Valid for fully-automatic operation with final temperature of 120°C for turbomixer and 55°C for cooler; but only when cooling water flow is sufficient and water temperature is no higher than 15°C.
COMBIMIX-RO
COMBIMIX-RO is the combination of the heating mixer TRM and the horizontal cooler RFO. It is used for those applications where the mixing process has a higher dry-blend final temperature.
The RFO range of coolers used for this combination has a special design to allow homogenization and cooling of three or more simultaneous mixers from the turbomixer
The internal parts in contact with the material are constructed in stainless steel.
Hinged for inspection and polished internally for cleanliness.
Available from 500 to 5.500 liters capacity, this kind of mixer has a good price-quality balance.
Accessories and optional are available.
RO COMBIMIX TRM + RFO SIZES & DATA
RO COMBIMIX - RO 200/500
Hourly production kg/h
Rigid PVC Max (¹): 595
Plasticized PVC max.: 510
RO COMBIMIX - RO 300/1000
Hourly production kg/h
Rigid PVC Max (¹): 890
Plasticized PVC max.: 762
RO COMBIMIX - RO 400/1200
Hourly production kg/h
Rigid PVC Max (¹): 1200
Plasticized PVC max.: 1020
RO COMBIMIX - RO 500/1500
Hourly production kg/h
Rigid PVC Max (¹): 1470
Plasticized PVC max.: 1260
RO COMBIMIX - RO 600/1500
Hourly production kg/h
Rigid PVC Max (¹): 1785
Plasticized PVC max.: 1530
RO COMBIMIX - RO 700/2000
Hourly production kg/h
Rigid PVC Max (¹): 2100
Plasticized PVC max.: 1800
RO COMBIMIX - RO 800/2500
Hourly production kg/h
Rigid PVC Max (¹): 2380
Plasticized PVC max.: 2040
RO COMBIMIX - RO 1000/3000
Hourly production kg/h
Rigid PVC Max (¹): 2975
Plasticized PVC max.: 2550
RO COMBIMIX - RO 1200/3000
Hourly production kg/h
Rigid PVC Max (¹): 3500
Plasticized PVC max.: 3000
RO COMBIMIX - RO 1500/4500
Hourly production kg/h
Rigid PVC Max (¹): 4480
Plasticized PVC max.: 3840
RO COMBIMIX - RO 2000/5500
Hourly production kg/h
Rigid PVC Max (¹): 5950
Plasticized PVC max.: 5100
Technical Sheet RO
Technical Sheet TRM
Technical Sheet RFO
Download Technical Sheet RO
Download Technical Sheet TRM
Download Technical Sheet RFO
N.B. The data shown in the table are purely indicative and must be confirmed by PLAS MEC.
(¹) Valid for fully-automatic operation with final temperature of 120°C for turbomixer and 60°C for cooler; but only when cooling water flow is sufficient and water temperature is no higher than 15°C.